We are pleased to inform you that we manufacturer close tolerance Stainless Steel Strips and Foils of 316, 304, 301 and 202 Grade. The above alloys can be supplied in 3 to 375 mm width in Soft, Half Hard, Full Hard and Spring Hard tempers.

Our Strips are precision rolled on imported Sendzimir Mill to a close tolerance. We offer a Gauge tolerance of 0.02 mm for thick material (0.30 0.60) and 0.01 mm for thin strips (less than 0.30 mm).

Our Strips are especially suited manufacture of small precision components requiring bending, drawing and punching operations.

Using RCI quality Stainless Steel Strips is economical in terms of material saving, fewer rejections as well as longer life of dies and punches all due to a very precise gauge control.

Applications: Used in electrical, Computer, Watch, thermostat, Fountain Pen Nibs, Chemical Industry, Battery Cell Contacts Flexible hoses etc.

Ordering: Please mention the Alloy Grade, Temper, Thickness, Width & Quantity in your enquiries.



Stainless Steel

 Alloy SS 301,SS 310,202 , 304, 316, 430 SS-1% Ni 
 Width 3 mm to 375 mm
Thickness 0.90 mm to 0.03 mm
  Temper Rockwell C up to 48

Vickers (Hv) 140-480


Maximum Hardness-We can supply



Maximum Hardness


0.60 - 0.30 mm thickness

0.30 - 0.05 mm thickness

 SS 202 400-440 Hv Max. 440-460 Hv Max.
SS 304 380-420 Hv Max. 400-420 Hv Max.
SS 301 420-460 Hv Max. 460-500 Hv Max.
SS J4 (1%) 420-440 Hv Max. 430-580 Hv Max.


Finishes                                :  (a) 2B- Bright (As rolled for Hard Strips)

                                         (b) 2D- Dull (Annealed  & Pickled for soft strips)

                                         (c) Brushed  - Semi Bright






Hv VICKERS HRC Rockwell -C
SOFT 130-200 -
QUARTER HARD 336-300 -
HALF HARD 300-360 31 36
HARD 360-400 36 41
FULL HARD 400-450 41 45
SPRING HARD Above 450 Above 45
For More Technical specifications of Stainless Steel